Resource Center
Bye-Bye Debris: Vacuuming to Waste the Right Way
Need to clear out heavy debris without clogging your filter? This quick tutorial shows you how to vacuum to waste using your Hayward sand filter—a smart way to remove large debris while keeping your filtration system clean and stress-free.
Resource Details
Key Takeaways:
1. “Waste” mode bypasses the filter and sends debris out through the waste line.
2. This method helps prevent filter clogs during heavy cleanups.
3. You’ll lose some water, but gain a cleaner pool with less strain on your system.
Step-by-Step Process:
1. Set up your vacuum system as usual and connect the hose to the skimmer.
2. Turn off the pump and move the multiport valve to the “WASTE” setting.
3. Turn the pump back on and begin vacuuming.
4. When finished, turn off the pump, return the valve to “FILTER,” disconnect your vacuum, and restart the pump.
