Resource Center
Revitalizing Your Spa Filter with Filter Wash Spray
Welcome to your comprehensive guide on utilizing Filter Wash Spray to breathe new life into your cartridge filter. This spray is no ordinary cleaner; it's a spa superhero, specifically formulated to dive deep into the labyrinth of your cartridge filter, leaving it as good as new. This guide will take you through the process step-by-step, ensuring that you can keep your spa's water crystal clear and oh-so-inviting.
Resource Details
Key Takeaways:
1. Frequency Matters: Using Filter Wash Spray every few weeks or when you change your spa water can significantly prolong the life of your cartridge and keep your spa's water quality at its best.
2. Bather Load: The more frequently your spa is used, the more attention your filter will need. More bathers = more frequent cleaning.
3. Flow Rate Is Your Guide: A noticeable decrease in your spa's water flow rate is usually an indication that your cartridge filter needs some TLC.
Step-by-Step Process:
1. Check the Filter: If the water flow rate drops or if you just know it's time, turn off your spa and carefully remove the filter element from its casing.
2. Initial Rinse: Rinse off loose dirt and material from the filter using a garden hose.
3. Spray It Down: Generously spray Filter Wash over the entire surface area of the filter element. Make sure you saturate it completely.
4. Let It Sit: For optimal results, allow the spray to sit for 5-10 minutes.
5. Final Rinse: Thoroughly rinse the filter with a garden hose. For particularly soiled filters, a second application may be necessary.
Reinstall: After ensuring that all cleaner is removed, replace the filter cartridge and turn on your spa.
