Resource Center
Ultimate Guide to Pool Opening: Ensuring a Smooth Start with The Great Escape
Congratulations on your new pool from The Great Escape! Starting up your pool for the first time is an exciting moment. This comprehensive guide will walk you through the essential steps to ensure your pump and cartridge filter are functioning properly, and how to balance your pool water for a crystal-clear swimming experience.
Resource Details
Key Takeaways:
1. Proper Setup: Learn how to correctly set up your pump and cartridge filter to ensure optimal performance.
2. Water Balancing: Understand the steps to balance your pool water using the WATER TRENDS start-up kit.
3. Chemical Maintenance: Discover how to use Nature 2 sanitizer and other chemicals to keep your pool water safe and clean.
Step-by-Step Process:
1. Pump and Filter Setup:
- Have a certified electrician connect your pump motor to ensure all electrical components are operational.
- Check that the pool is filled to at least the middle of the skimmer.
- Open any installed valves to allow water flow through the filtration system.
- Turn on the pump and check for water movement through the clear lid.
- Prime the pump by releasing air from the system using the valve on the cartridge filter.
2. Water Testing and Balancing:
- Use a Quick 5 test strip to check alkalinity and pH levels.
- Adjust alkalinity with Alkalinity Up or pH Down as needed, following bottle instructions.
- Balance pH levels using pH Up or pH Down, allowing chemicals to circulate before re-testing.
3. Sanitizing and Shocking:
- Install the Nature 2 sanitizer into the ProVision system as per instructions.
- Shock the pool with WATER TRENDS shock, diluting it in a bucket before adding to the pool.
4. Circulation and Stabilization:
- Run the pump and filter system continuously for 4 days.
- Re-test the water, focusing on maintaining a 1-2 ppm chlorine level using the V-Pack sleeve.
- After 4 days, adjust the free chlorine residual to 0.4-0.6 ppm.
5. Adding Stabilizer:
- Add stabilizer to prolong chlorine effectiveness, placing it in a sock secured to your pool ladder.
Resources & Explanations:
- WATER TRENDS Start-up Kit: Includes all necessary chemicals for balancing and maintaining your pool water.
- Nature 2 Sanitizer: Uses minerals for low chlorine sanitation.
- Quick 5 Test Strips: Essential for testing alkalinity and pH levels.
