Resource Center
Power Up Your Pool: Swapping Out the Pro Vision V-Pack
In this short tutorial, we walk you through replacing the V-Pack in your Pro Vision water system—one of the easiest ways to keep your filtration setup running smoothly. Learn the correct orientation, tips for seal alignment, and how to prevent water loss during installation.
Resource Details
Key Takeaways
1. Shut off your pump and close valves to avoid unnecessary water loss.
2. The black seal on the V-Pack must face upward when inserted.
3. Always double-check the O-ring is properly seated before retightening the collar.
Step-by-Step Process
1. Turn off your pump.
2. If equipped, close the shut-off valves on either side of the system.
3. Twist the large collar counterclockwise and remove it.
4. Remove the used V-Pack and dispose of it properly.
5. Insert the new V-Pack with the black seal facing upward.
6. Retighten the collar clockwise and ensure the O-ring is securely seated.
